Version History
Version 2.802: (Early release available if requested)
Version 2.801, 10/04/2024
Version 2.800: (Only available from App Store as install on September 16th)
Version 2.790, 09/01/2024
Version 2.789, 08/18/2024
Fixes and Improvements:
Version 2.788, 08/04/2024
Fixes and Improvements:
Version 2.787, 07/18/2024
Fixes and Improvements:
Version 2.786, 06/22/2024
Fixes and Improvements:
Version 2.785, 05/25/2024
Version 2.784, 05/11/2024
Version 2.783, 04/25/2024
Version 2.782, 04/14/2024
Version 2.781, 03/27/2024
Version 2.780, 03/12/2024
Version 2.779, 02/27/2024
Version 2.778, 02/08/2024
Version 2.777, 02/05/2024
Version 2.776, 01/22/2024
Version 2.775, 12/28/2023
Version 2.774, 11/14/2023
Version 2.773, 10/31/2023
Version 2.772, 10/13/2023
Version 2.771: (Mac users with M1/M2 need App Store install once republished)
Version 2.770: (Only available from App Store as install on September 19th)
Version 2.768, 08/10/2023
Fixes and Improvements:
Version 2.767, 07/25/2023
Version 2.766, 07/23/2023
Fixes and Improvements:
Version 2.765, 07/02/2023
Fixes and Improvements:
Version 2.764, 06/18/2023
Fixes and Improvements:
Version 2.763, 06/03/2023
Fixes and Improvements:
Version 2.762, 05/19/2023
New:
Fixes and Improvements:
Version 2.761, 05/01/2023
Version 2.760, 04/16/2023
Version 2.759, 04/01/2023
Version 2.758, 03/02/2023
Version 2.757, 02/10/2023
Version 2.756, 01/23/2023
Version 2.755, 01/09/2023
Version 2.754, 12/18/2022
Version 2.753, 12/04/2022
Version 2.752, 11/05/2022
Version 2.751, 10/12/2022
Version 2.749, 09/17/202
Version 2.748, 09/01/2022
Version 2.747, 07/28/2022
Version 2.746, 07/14/2022
Version 2.745, 06/30/2022
Version 2.744, 06/16/2022
Version 2.743, 05/16/2022
Version 2.742, 05/02/2022
Version 2.741, 04/10/2022
Version 2.74, 03/28/2022
Version 2.739, 03/13/2022
Version 2.738, 03/05/2022
Version 2.737, 02/26/2022
Version 2.736, 02/17/2022
Version 2.735, 02/10/2022
Version 2.734, 02/05/2022
Version 2.733, 01/22/2022
Version 2.732, 01/17/2022
Version 2.731, 01/07/2022
Version 2.73, 12/29/2021 - Fusion 2.0.11894 or newer required
Version 2.72, 12/25/2021
Version 2.71, 12/15/2021
Version 2.70, 12/13/2021
Version 2.69, 11/23/2021
Version 2.68, 11/05/2021
Version 2.66, 10/18/2021
Version 2.65, 10/08/2021
Version 2.64, 09/24/2021
Version 2.63, 09/13/2021
Version 2.62, 09/12/2021
Version 2.61, 08/16/2021
Version 2.60, 08/06/2021
Version 2.59, 07/09/2021
Version 2.58, 06/29/2021
Version 2.57, 06/18/2021
Version 2.56, 06/03/2021
Version 2.55, 05/23/2021
Version 2.54, 05/13/2021
Version 2.53, 05/07/2021
Version 2.52, 04/30/2021
Version 2.51, 04/21/2021
Version 2.50, 04/18/2021
Version 2.49, 04/07/2021
Version 2.48, 03/22/2021
Version 2.47, 03/12/2021
Version 2.46, 02/24/2021
Version 2.45, 02/09/2021
Version 2.44, 01/19/2021
Version 2.43, 12/16/2020
Version 2.42, 12/8/2020
Version 2.41, 11/26/2020
Version 2.40, 11/19/2020:
Version 2.39, 11/10/2020:
Version 2.38, 10/31/2020:
Version 2.00, 1/20/2019:
- Fix possible error with Unselect
Version 2.801, 10/04/2024
- Fix for labeling components with numeric names
- Fix to enable tooltips
- Arrange improvments
Version 2.800: (Only available from App Store as install on September 16th)
- Required update for Fusion 360 September 17th Release
- Removed component label instance number when Full Path not set for cutlist, report and map labeling
- Fixed DXF export when including tabs
Version 2.790, 09/01/2024
- Refresh
Version 2.789, 08/18/2024
Fixes and Improvements:
- Fixed Tabs setting with DXF export
- Fixed handling of special charaxters in components for DXF export
- Fix for saving selections
- Fixed possible parts omitted from map
Version 2.788, 08/04/2024
Fixes and Improvements:
- New: Users settings saved outside the model. See User Settings
- Improved handling of export settings
- Fix board dimensions when changing units
- Detect and report missing font for DXF export of labels
Version 2.787, 07/18/2024
Fixes and Improvements:
- Improved handling of corrupted components for DXF export
- Corrected insets layer naming error for DXF export
Version 2.786, 06/22/2024
Fixes and Improvements:
- Labels height values can now be set a specific size with cm units as the default
- Labeling updated matching API changes
- DXF export of labels matching API changes with performance improvements
Version 2.785, 05/25/2024
- Fixed UnDo for model changes
- Fix for Report task print rotate option
Version 2.784, 05/11/2024
- Required update for the Fusion 360 May release
- Fix for Flip task
Version 2.783, 04/25/2024
- Fix for Material Management
Version 2.782, 04/14/2024
- Fixes for Cutlist export task
- Validate permissions for output directory with exports
Version 2.781, 03/27/2024
- Selection support enhanced to save selections, quantities and rotation between invocations. See Selection Support
Version 2.780, 03/12/2024
- Fixes for Automatic Grain Alignment
- Fix for DXF/SVG export file and material naming
Version 2.779, 02/27/2024
- Fixed selection support for board material type
- Fixed rare part rejection
Version 2.778, 02/08/2024
- Hot fix for both SVG export with Kerf and DXF export
Version 2.777, 02/05/2024
- SVG export, when file per board is selected, names files with board types
- Option, Include Part #, will include component Part Number property in map label and cutlist
- Fix for DXF export with labels
Version 2.776, 01/22/2024
- DXF export, when file per board is selected, names files with board types
- Minimized label slider will remove label sketches
- Fixed delimitor selection for cutlist export
Version 2.775, 12/28/2023
- Fix for SVG / DXF exports with non-zero kerf
- Improved messaging
Version 2.774, 11/14/2023
- Add quantity to lumber list in Material Management. See Material Management
Version 2.773, 10/31/2023
- Fixes for October release of Fusion 360
- Performance improvements
Version 2.772, 10/13/2023
- Fix for Export map Cutlist with Group common dimensions enabled
- Fix for franctions not displaying correctly
- Additional fixes for Fusion 360's September release
Version 2.771: (Mac users with M1/M2 need App Store install once republished)
- Fix for Mac with Apple silicon M1/M2 processor
- Fixes for Fusion update
Version 2.770: (Only available from App Store as install on September 19th)
- Required update for Fusion 360 September 19th Release
- Allow selected parts to be excluded by setting count to zero
- Boards dimension validation accounts for both Include Entire Model and excluded parts
Version 2.768, 08/10/2023
Fixes and Improvements:
- Fixed mapping error when material grain direction vertical
Version 2.767, 07/25/2023
- Fix for broken selection API in Fusion July release
Version 2.766, 07/23/2023
Fixes and Improvements:
- Report model issues when detected
- Performance improvements with mapping
Version 2.765, 07/02/2023
Fixes and Improvements:
- Fix for API changes in Fusion's July release
Version 2.764, 06/18/2023
Fixes and Improvements:
- Fix for cutlist export column format
- Fix for grain direction in linked assemblies
Version 2.763, 06/03/2023
Fixes and Improvements:
- Fix for mapping models with linked components and assemblies
- Fix for grain alignment with bodies not defined in a component
- Fix for mapping with diagonal arrangement
- Improvements with printed Reports
Version 2.762, 05/19/2023
New:
- Enhanced selection support enabling deselect of parts and boards type
- Added selectable separator for Cutlist CSV file
Fixes and Improvements:
- Mapping improvements for both Fill Diagonal and Width Horizontally arrangements
- Fixed labeling on rotated parts
- Fixes and improved messaging
Version 2.761, 05/01/2023
- Added option to export a ZIP file containing a separate DXF file for each part
- Fixes for selection support, labeling short, fullPathNames and fractions
- Fix for rearranging parts between boards
Version 2.760, 04/16/2023
- Fix for cutlist creation
- Fix for selection
Version 2.759, 04/01/2023
- Fix for cutlist when units are fractional
- Fix part size issue
Version 2.758, 03/02/2023
- Added SVG Export Grayscale color for Insets to provide a scaled gray fill indicating depth. See Export map to SVG
- Performance improvements for DXF export
- Fixed the Tabs option for Export DXF and Sketch Map tasks
Version 2.757, 02/10/2023
- Report improvements combining common board types
- SVG Export update to support Glowforge Laser App
- Bug fixes
Version 2.756, 01/23/2023
- Added zero to the precision setting which will round to the nearest whole unit
- Enhanced Deepnest support for SVG Export to includes Cutouts, Insets and Labels. See SVG Format for Deepnest
- Fix for API change in Fusion update coming the 30th of January 2023
- Fix selection support for nested items with duplicated names
- Fixes for print output with Report, Chrome issue and resizing to fill pages
- Fix for labeling on rotated parts
Version 2.755, 01/09/2023
- Export SVG File improvements
- Usability improvements with options
- Selection and entire model options always displayed
- Fix issue with saving default board dimensions
- Fix for DXF/SVG with laser kerf for cutouts
Version 2.754, 12/18/2022
- Selection support enhancements including selecting board material types. See Selection Support
Version 2.753, 12/04/2022
- Include board labels with DXF export when present
- Rotated part's length & width dimensions are reflected in the cutlist
- Improved dimensions accuracy
- Performance improvements in mapping and exports
Version 2.752, 11/05/2022
- Grain direction for mapped boards is now selectable. See Grain Orientation on Boards
- Prevent component in created map from being selected which is invalid
- Selection support fix for bodies created at root
Version 2.751, 10/12/2022
- Match the long edge of parts or its grain (when enabled) based on the targeted board's orientation, portrait or landscape. See Choosing Map Layout
- Fixes for Automatic Grain Alignment support
Version 2.749, 09/17/202
- DXF export fix for bodies created with splines
- DXF export now restores exploded text back to sketchText
- Fix for board label position
Version 2.748, 09/01/2022
- Improvements and fixes for options with app and all tasks
- Board dimensions saved as defaults automatically
Version 2.747, 07/28/2022
- Added report popup when DXF export encounters invalid components
- Fix for selection support
- Disable OK button when editing scrap list to avoid confusion
Version 2.746, 07/14/2022
- Added option to set the spacing between boards in the map
- Mapping performance improvements
- Changed the Line Thickness setting value to represent default units for SVG exports. Previously it was pixels.
Version 2.745, 06/30/2022
- Added support for Automatic Grain Alignment to compliment Fusion's new Grain Control
- Fixes for DXF, SVG and Report Exports
Version 2.744, 06/16/2022
- Added support to create scrap lumber lists of various sizes to be used during mapping
Version 2.743, 05/16/2022
- Major mapping improvements for special shapes
- Mapping performance improvements
- Added Polish for a total on 10 languages supported
- Fix for Export map Cutlist task
Version 2.742, 05/02/2022
- New Rotate Boards option for report printing
- Added Italian and Korean for a total on 9 languages supported
- Fix for the flipping map components with Flip task
- Fix handling of copied components with hidden source component
Version 2.741, 04/10/2022
- DXF export performance improvements
- Improvements for diagonal arrangement type
- Fixed tabs option for DXF
Version 2.74, 03/28/2022
- Required update to work with Fusion Release on 3/28/2022
Version 2.739, 03/13/2022
- Changes to defaults needed for coming Fusion release
Version 2.738, 03/05/2022
- DXF export fixes and improvements
- Sketch Map fixes and improvements
- Cancel mapping and exports working
Version 2.737, 02/26/2022
- Improvements with handling app cancel
- Local options properly saved in model
- Update for in-app notifications
- Fix for DXF export
Version 2.736, 02/17/2022
- An existing map will no longer be deleted when app is canceled
- Fixed color selection for labels with SVG and Report exports
- Fixed for DXF export with Kerf
Version 2.735, 02/10/2022
- Additional fix for DXF export with Kerf related to API change in recent Fusion Build
Version 2.734, 02/05/2022
- Fix exports with Kerf error caused by API change in recent Fusion Build
- Fix board size in SVG export
- Fix for Insets exports with Kerf
Version 2.733, 01/22/2022
- Fix skipping parts
Version 2.732, 01/17/2022
- Fix for map arrangement by length with board edge
- Fix for mapping and exports when Y Up is selected
Version 2.731, 01/07/2022
- Fixes for glass boards and label options
- Timeline fixes for all tasks and context commands
Version 2.73, 12/29/2021 - Fusion 2.0.11894 or newer required
- Performance improvements when invoking MBP
Version 2.72, 12/25/2021
- Improve visibility of labels by elevating to component top
- Fixes and stability improvements
Version 2.71, 12/15/2021
- Fix for missing parts
Version 2.70, 12/13/2021
- Performance improvements with mapping and exports
- Fix for face selection when mapping
- Fix board as glass option
Version 2.69, 11/23/2021
- Use Full Path Name option added providing unique names for labeling and component lists in cutlist and report exports
- Bug fixes
Version 2.68, 11/05/2021
- fix for perimeter determination issue
- fix for Fill Boards Diagonally causing overlapping
Version 2.66, 10/18/2021
- Improved results for arrangement type Fill Boards Diagonally
- Improved map visual contrast for better readability
Version 2.65, 10/08/2021
- New Sketch Map task creates perimeter & cutout sketches for creating toolpaths in additive mfg
- All component name labeling will match the source name including instance number
- Fix for SVG/DXF export with laser kerf
- Fix DXF Export layer names dimension resolution
Version 2.64, 09/24/2021
- Added support to label with fractional inches
Version 2.63, 09/13/2021
- Added the option to print a Report
Version 2.62, 09/12/2021
- Fix for kerf too large occuring when exporting dxf or svg with kerf
- Increase quantity max on component selection table
Version 2.61, 08/16/2021
- Fixed SVG and Report export handling of Nurbs Curves (splines)
- Fixed for timeline group
Version 2.60, 08/06/2021
- Enhancements to SVG and Report to optionally Fill Faces
- Fixed SVG and Report export to handle Ellipse
Version 2.59, 07/09/2021
- Fixes for SVG/DXF exports with non-zero kerf and shallow insets
- Fixed SVG export for EllipticalArc found in features created from fonts
- Fix issue saving local board dimensions
Version 2.58, 06/29/2021
- New labeling options to include either a unique part numbers, component name or both
- Exported cutlist and report cutlist will include sequential part numbers when not grouping by size
- Corrections to label placement
Version 2.57, 06/18/2021
- New option that affects all arrangement types called Arrange from bottom up
- Fix for labeling when orientation is set to Y-up
- Fix for sketch output option
- Fix for svg export with Y up selected
Version 2.56, 06/03/2021
- All Fonts available including single line fonts. No initialization required.
- New option to generate a tabs layer in DXF export allowing control of tab width, height and distance
- Adjustments to correctly determine dimensions on some inorganic shapes
- Fix for Fusion crash when non-zero laser kerf specified
- Fix for DXF export option to create file for each board
Version 2.55, 05/23/2021
- Added DXF export option to include board perimeter
- Fixes to handling of labeling and exports for manually rearranged map
- Fix for Flip Task
Version 2.54, 05/13/2021
- Report provides cutlist grouping of components with common dimensions as option
- Automatic install of software updates by default with option to disable
Version 2.53, 05/07/2021
- Improvements to the update install which is now independent from the app store
- Fix mapping issue caused by incorrect dimensions
- Fix for linked components
Version 2.52, 04/30/2021
- Added update button to auto-install the latest or beta version independent of the app store
- Can Rotate option will now have an effect when grain direction is swapped
- Fix for selection quantity when Include Entire Model enabled
- Fix for missing perimeter, affects DXF, SVG and Report outputs
- Fix for DXF export, missing cutouts
Version 2.51, 04/21/2021
- Bug fixes and performance improvements
Version 2.50, 04/18/2021
- Fix for DXF export, missing perimeter edge
- Fix the Include entire model option when making a Selection
- Fix flip task broken in Fusion build 2.0.10027
Version 2.49, 04/07/2021
- Fix for Fusion build 2.0.10027 break
- Added Decimal Precision option for Labeling, Cutlist and Report
- DXF export optimization
- Fix for DXF file Inset depth specified in layer name
- Fixes to flat pattern creation affecting DXF, SVG and Report generation
Version 2.48, 03/22/2021
- Independently set size or disable component label dimensions and name
- DXF Export task will scale up
- Major performance enhancements for app startup and run
- Duplicate user parameters removed when pressing cancel
- Fix for flat pattern creation (svg/dxf export)
- Fixes for selection support
Version 2.47, 03/12/2021
- Fill Board Diagonally arrangement type improvements.
- Prevent Fusion crash when double click on toolbar icon.
- Export SVG with laser kerf fix for duplicate perimeter
- Fixes for cutlist and selection support
- Fixes & optimization for flat pattern creation (svg/dxf export)
Version 2.46, 02/24/2021
- Added new task, Export map Cutlist, to Map object
- Added grouping common size components option to Cutlist creation
- Fixed issue with saving default board dimensions with Save Defaults
Version 2.45, 02/09/2021
- fixes for DXF and SVG export
- removed app settings from userparameters
Version 2.44, 01/19/2021
- DXF export now places holes in separate layers grouped and labeled with diameter and depth
- Added option to run the Report task as a Map Type
- Fix Y Up orientation issue with SVG export
Version 2.43, 12/16/2020
- Tight arrangement of all special shapes for significant material savings
- Fix for inverted arcs on SVG and Map Report output when Y-up option selected
Version 2.42, 12/8/2020
- mapping performance and accuracy improvements
- fixes for dxf / svg export
Version 2.41, 11/26/2020
- cutlist csv file improvements
- corrected handling of matching dimensions with rotated components in cutlist
- corrected labeling on map, dxf & svg exports and map report with rotated components
Version 2.40, 11/19/2020:
- Fix for model with 10 or more duplicate linked components
- Fix board dimension validation error resulting is log creation during labeling or cutlist creation
Version 2.39, 11/10/2020:
- Improvements in both placement and dimensioning
- Added fill color (background) setting to both SVG export and map in Report generation.
Version 2.38, 10/31/2020:
- Russian has been added to the existing translation of English, German, Chinese, Janpanese, French and Spanish.
- Map Report task. Description
Version 2.00, 1/20/2019:
- Initial release of MapBoards Pro.